Light Alarm Kit
Light Alarm Kit
The Light Alarm kit by MitchElectronics is a DIY electronics kit that lets you build an alarm that triggers upon detecting light.
The Light Alarm kit allows you to build an alarm circuit that beeps a small (but very loud) buzzer upon detecting too much light. The sensitivity of the light sensor can be changed with the onboard potentiometer, and component values on the PCB can be changed if needed to increase or decrease the rate of the buzzer.
Because the buzzer is a 5V device, this circuit needs a 5V supply which can be obtained using a 7805 regulator or using another MitchElectronics kit such as the Simple Power Supply and the Simple Power Module SMD Trainer kit. If the buzzer is removed, the board can be powered from a 9V PP3 battery and an external buzzer circuit can then be used that is compatible with 9V supplies.
Product specifics
- Component Count: 20
- Battery Powered: No – 5V Only
- Operating Voltage: 5V
- Operating Frequency: N/A
- Dimensions (PCB): 68mm x 34mm
- Mounting Holes: Yes – 4 x M4 (60mm x 26mm)
- Prebuilt: No – Kit form
- Batteries Not Included
Included in this kit
- 2 x 8 DIP Socket
- 1 x 14 DIP Socket
- 1 x LM358
- 1 x NE555
- 1 x 4013
- 1 x 100nF Capacitor
- 1 x 10uF Capacitor
- 2 x 1KΩ Resistor
- 2 x 10KΩ Resistor
- 1 x 56KΩ Resistor
- 1 x 10KΩ Potentiometer
- 2 x 1N5817 Diode
- 1 x 2N3904
- 1 x Photodetector
- 1 x Buzzer
- 1 x Tactile Switch
- 1 x Black Wire
- 1 x Red Wire
Applications
The Light Alarm kit is an excellent project for those wanting to learn about photodetectors, how they work, and how they can be used in trigger circuits. This kit also teaches how logic circuits work, the function of flip flops, and how comparators can be used to convert an analogue signal into a digital signal. Additionally, this is also excellent for those looking to create basic security systems as well as those who want to train their soldering capabilities.
Notes
Note that product specifics such as output frequency depend on the tolerance of the components. The numbers provided here are an approximation only.
All parts sold by MitchElectronics are compliant with RoHS and REACH directives which ensure that they can be used in commercial environments as well as complying with environmental laws.
Instructions
https://mitchelectronics.co.uk/resources/light-alarm-kit-instructions/